AIRBRUSHING TORN METAL - ANT BIKE
In this How To Airbrush article Lee continues to show you how he airbrushed this very cool looking bike.
PART TWO
Next I take a 1/4 inch fine line tape and create the top and lower edge for the tears. Where ever the tape crosses each other at a point I cut the overlapping parts off to create a point where the tear starts and ends. After the fineline tape is completely laid out I mask it off with 3/4 inch masking tape. Now its ready for the ant artwork.
Now that the tear graphic masking is done I can now start the ant mural. First I black out the silver over spray from the tears and wipe down a with a tack cloth after it's completely dry to remove any excess over spray.
Now I start free handing the ant with white and really don't stop until I get a semi detailed illustration of the ant. I tack rag it down again and then come in with a little black to remove any white over spray from doing the illustration
CONTINUE ON TO:
PART ONE
PART THREE
Copyrights :Airhead Airbrush.Com , Inc. Reserved No part of this tutorial may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, electrostatic, magnetic tape, mechanical or otherwise, without prior permission in writing from Airhead Airbrush. Com , Inc.
google ads
Section Widget
