PART ONE
If you have questions about airbrushing or kustom painting beyond what this web site provides answers too please take part in our AIRBRUSH FORUM here on howtoairbrush.com. Registeration is FREE and you'll find the most helpful airbrush artist on the Internet there to help answer your questions.
Don Johnson
Pictured above you can see Cody is holding his airbrush much the same you would a pen, relaxed and loose in his hand at this point.
Newsprint is a great inexpensive paper to practice these lessons on.
Relax and have fun with these exercises, by doing these you are training your mind , finger to control this tool called the airbrush . If I can learn to airbrush anyone can.


Pictured above you can see Cody is not only pushing down on the trigger but has also pulled the trigger back, at this point you should have not only air but paint coming out of your airbrush. With a double action airbrush the further you pull the trigger back the more paint you will apply. So the amount of paint you spray with a double action airbrush is regulated by how far you pull the trigger back, the further back the trigger travels the more paint will be applied. The amount of air or PSI as it's often referred to should be regulated at your compressor not the airbrush trigger; you always want your index finger to depress the trigger fully downward.
Summary: With a double action airbrush pushing down on trigger gives you air, pulling back gives you paint, do both you get both air and paint. While airbrushing always leave the air on trigger fully depressed, air always on.
Now let's look at how the distance you are away from the surface you are spraying paint onto comes into play. If you have ever played with spray can's of paint you know that the further you are from the surface the larger an area you cover and the paint pattern is very fuzzy or defused.
Move closer with the spray can to the surface and you will notice the paint covers a smaller area and becomes more defined.
The same holds true with an airbrush. In the two pictures above in the top picture my airbrush is several inches away from the paper: notice how large the dot is I sprayed. In the lower of the two pictures my airbrush is half an inch or less from the paper; notice how small the dot is I sprayed.
Summary: The further you are from the surface the paint you spray thru your airbrush will cover a larger area and not be well defined. The closer you are with your airbrush the smaller an area you will cover and the pattern will be more defined.
CONTINUE ON TO AIRBRUSH LESSON ONE:
PART TWO
PART THREE
Copyrights:Airhead Airbrush.Com, Inc. Reserved No part of this tutorial may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, electrostatic, magnetic tape, mechanical or otherwise, without prior permission in writing from Airhead Airbrush. Com, Inc.


Sections
Recent Articles








Recent Forum Posts
Recent Blog Posts
Recent Comments