 |
|
How To Airbrush #1 the DVD, 45
minute airbrush instructional DVD covering basic airbrush lessons, airbrush
equipment basics, airbrush cleaning and maintenance. $39.95 US only sorry, FREE
shipping US mail. Click on the picture above to order. |

Get your technique together today!! Subscribe to our
magazine; it will prove to be the best tool you have in your artist arsenal of
tools. Click on the cover above for details about
Airbrush Technique
Magazine. |
|
Move beyond the basics 100's of
airbrush, custom painting tutorials and lessons Members only support forum
for live help Airbrush Technique/Airbrush Artist Magazine CLICK HERE FOR MORE
INFORMATION |
Airbrush Trouble Shooting
"Fixing a Bent Needle"
On this page you will find examples of "how To" fix a bent
needle tip.
By Don Johnson
Brought to you by Airhead
Airbrush .Com , Inc. and Airbrush Artist Magazine .Com
and Airbrush Technique
Magazine. Your best resources for learning " How To " Airbrush, custom
paint. Subscribe today to the best Airbrush, Custom painting magazines on the
planet. Click on the magazine banners below for detailed information about the
magazines and or to subscribe.
Here are a few Airbrush Tech
tips to help with that bent tip on your needle. I hope you find them
helpful. |
|
You'll find Badger, Thayer and Chandler
and some of the new airbrushes coming out of Asia, China bend very easy it
seems where the Paasche and Iwata are not quit so prone to bending
easily.
Using a magnifying glass will help you check the very tip of
your needle as pictured above. |
|
If it is just a case of the needle tip
having a slight burr on it you can use a fine knife sharpening stone to polish
the burr off. |
|
For a needle with more than a slight burr
on it the use of two quarters works nicely to straighten the needle tip out
once again. |
|
Place the quarters between your thumb and
index finger as pictured above. Insert the bent needle tip between the two
quarters; now apply pressure to the two quarters as you pull the needle out of
the two quarts while turning the needle shaft round and round using the index
and thumb of the hand holding the needle shaft. ( you want to spin the needle
as you pull it out in other words) You might have to repeat this process
several times but over the years I have had great luck straightening bent
needle tips out in this fashion and I believe you will also. |
| Copyrights :Airhead Airbrush.Com , Inc. Reserved No part of
this tutorial may be reproduced, stored in a retrieval system or transmitted in
any form or by any means, electronic, electrostatic, magnetic tape, mechanical
or otherwise, without prior permission in writing from Airhead Airbrush. Com ,
Inc. |
Discuss this tutorial in our
forums
|